PEEK Film,High-temperature resistant polymer film

Industry video

The product is widely used in various fields such as new energy vehicles, AI robots, mobile phones and tablets, 3C home appliances, medical equipment, and mechanical equipment

New energy vehicle
AI robot
3C electronics
home appliance
Medical equipment
Communication transmission

The application of PEEK film in new energy vehicles

The focus is mainly on the areas with extremely high requirements for material properties, such as the electric drive system, battery system, thermal management, and lightweight structure. This is because it possesses characteristics such as high temperature resistance, chemical corrosion resistance, high mechanical strength, low moisture absorption, and flame retardancy, making it highly suitable for the demanding conditions of new energy vehicles.

PEEK making it highly suitable for the demanding operating conditions of new energy vehicles.

PEEK possesses excellent properties such as high temperature resistance, chemical corrosion resistance, and high mechanical strength, making it highly suitable for the demanding operating conditions of new energy vehicles.

PEI films can serve as separator substrates due to their heat resistance and dimensional stability

PEI films act as insulating liners inside motor slots, offering superior dielectric strength and thermal endurance essential for high-speed motors.

high temperature resistance + wear resistance + low extractables

PEEK is used in auxiliary seals, wear-resistant rings, structural components, and special functional parts to leverage its advantages of "high temperature resistance + wear resistance + low extractables."

BOPP Film for Capacitor Base Material

It features low dielectric constant and low dielectric loss, which helps reduce energy loss and enhance the efficiency of capacitors. For instance, ultra-thin BOPP capacitor films adopted in high-frequency circuits can effectively cut down energy dissipation during signal transmission.

PEEK film takes advantage of its high-temperature resistance and chemical stability to encapsulate high-density tactile sensing arrays

PEEK films can be utilized in high-frequency flexible printed circuit boards (FPCs) for robotic control coordination or edge computing modules.

PEEK films, with their outstanding high-temperature resistance, high strength, corrosion resistance, electrical insulation, and excellent biocompatibility, are playing an increasingly important role in high-end robotics, particularly in the fields of industrial collaborative robots, medical robots, and humanoid robots.

The PEEK film can reduce direct friction between metals and extend the service life.

In the future, with the advancement of intelligent manufacturing and new material technologies, PEEK films are expected to become one of the key fundamental materials for AI robots to achieve high performance, high reliability and intelligence.

PCPMMA replaces pure PMMA or glass to enhance the drop resistance while maintaining high light transmittance.

在部分中端机型中，PCPMMA 可替代全 PC 背板，提高表面硬度和耐刮性，同时保留一定抗冲击性，并可通过喷涂/IML 工艺实现类玻璃质感。

PC/PMMA combines lightweight properties, high gloss/hard matte surface effects, and impact resistance protection.

PCPMMA is used for the decorative panels on the A side (screen frame) or the B side (keyboard surface), offering lightweight design, high gloss/hard matte surface effects, and impact resistance protection.

High permeability + High impact resistance + High hardness

For the panels of smart speakers, the back covers of smart watches, and the viewing windows of AR/VR headsets, PCPMMA offers sufficient light transmittance and impact resistance protection. At the same time, it can be surface hardened or coated to achieve functions such as anti-fingerprint and anti-glare.

The PC/PMMA composite board can achieve a borderless and integrated large-screen visual effect.

High rigidity + certain toughness: PC offers resistance to impact and vibration, making it suitable for areas near the engine compartment or prone to collisions. High transparency + Good weather resistance: PMMA offers a light transmittance similar to that of glass, while resisting ultraviolet aging, and is not prone to yellowing or fogging, ensuring long-term clear display.

Using printed/coated PC films for exterior parts.

Using optical-grade PC film as a substrate for capacitive touch sensors, applied to the back of glass or plastic enclosures. The surface can feature a hardened coating, offering wear and scratch resistance, making it suitable for products with frequent touch operations (such as high-end water purifiers and dishwashers).

PEEK film has a temperature resistance of over 250℃ and can withstand multiple high-temperature and high-pressure sterilizations.

PEEK film can be applied in high-frequency and energy surgical equipment as insulating gaskets and electrode support films for electrosurgical units, radiofrequency ablation devices, ultrasonic scalpels, etc. It has a temperature resistance of over 250℃ and can withstand multiple high-temperature and high-pressure sterilizations. Stable dielectric performance, reducing energy loss.

PCPMMA is used for smartphone back covers

PCPMMA is used for smartphone back covers, essentially employing an engineering plastic solution to approximate the visual appearance of glass while retaining certain advantages such as impact resistance and lightweight properties.

biosensor

The electrical insulation, chemical inertness, and patternable surface of PEEK (e.g., via photolithography or laser etching) make it suitable as a substrate or insulating layer for sensors. Its high-temperature resistance allows for post-processing at elevated temperatures after immobilizing biomolecules to enhance binding strength.

Products

Industry video

The application of PEEK film in new energy vehicles

PEEK making it highly suitable for the demanding operating conditions of new energy vehicles.

PEI films can serve as separator substrates due to their heat resistance and dimensional stability

high temperature resistance + wear resistance + low extractables

BOPP Film for Capacitor Base Material

PEEK film takes advantage of its high-temperature resistance and chemical stability to encapsulate high-density tactile sensing arrays

PEEK films can be utilized in high-frequency flexible printed circuit boards (FPCs) for robotic control coordination or edge computing modules.

The PEEK film can reduce direct friction between metals and extend the service life.

PCPMMA replaces pure PMMA or glass to enhance the drop resistance while maintaining high light transmittance.

PC/PMMA combines lightweight properties, high gloss/hard matte surface effects, and impact resistance protection.

High permeability + High impact resistance + High hardness

The PC/PMMA composite board can achieve a borderless and integrated large-screen visual effect.

Using printed/coated PC films for exterior parts.

PEEK film has a temperature resistance of over 250℃ and can withstand multiple high-temperature and high-pressure sterilizations.

PCPMMA is used for smartphone back covers

biosensor

Products

Low crystallinity PEEK polyetheretherketone film

PEI Polyether Imide Film - Black

PEI film-本色

PSU polysulfone film

PPSU polycarbonate sulfone film

PA12 (Polydodecanedioamide) film

Highly crystalline PEEK

Semi-crystalline PEEK Film

product video

High-Performance PSU Film

Color. Protected. Perfected.

Did you know? Many phone back covers today aren’t glass or regular plastic — they’re made from PCPMMA

0.75mm Transparent Yellow Polycarbonate Sheet

Lightweight. Durable. Exceptionally Clear: The Optics of Innovation

Flame-Retardant Black PC Materials: Powering the Future of New Energy Vehicles

Professional R&D and manufacturingSpecial engineering plastic film

The product has covered more than 200 countries and regions

Company News

PEEK Film for Pressure Sensor Diaphragms

PC PMMA Sheet Supplier Qualification Guide

How to Specify Optical PC Film

PEI Film for Electrical Insulation

PEEK Film in Hot Chemical Service

BOPP Capacitor Film for Winding Yield Meta

Optical Grade PC Film: Controlling Visible Defects

PEI Film for Green Hydrogen Insulation Systems

2μm BOPP Film for Smaller DC-Link Capacitors

PEEK Film for EV Battery Insulation Design

PC/PMMA Film for Display Covers

2μm BOPP Capacitor Film Guide

PEEK Film for 260°C Insulation

PEI Film for 170°C Insulation

Optical Grade PC Film for Printed Display Windows: Controlling Clarity...

2μm BOPP Capacitor Film for Compact Power Capacitors: A Design-Margin ...

PEI Film for High-Temperature Electrical Insulation: Defining the 170°...

PC/PMMA Film and Sheet for Automotive Display Covers: Turning Optical ...

PEEK Film for High-Temperature Insulation: Technical Answers for 260°C...

Multicolor Composite Sheet for Electronics and Automotive Trim: From P...

Request for proposal and quotation

Leader in specialty engineering plastic film

Professional R&D and manufacturing
Special engineering plastic film